HICLEAR Product Guide
Individual units can be customized to treat wastewater from as low as 3 cubic metres per day to up to 80 cubic metres per day. However, due to the modular nature of the plants, individual units can be cascaded up to 700 cubic metres per day. Our technical support team can assist in sizing the plant if required.
Standard dimension HICLEAR units are available in lengths of 3m, 4m, 6m, 9m or 12m each.
Standard dimension HICLEAR units are available in lengths of 3m, 4m, 6m, 9m or 12m each.
In most cases our HICLEAR treatment plants can achieve up to the following effluent treatment parameters:
Biochemical Oxygen Demand (BOD5): Up to 10mg/L
Chemical Oxygen Demand (COD): up to 50 mg/L
Suspended Solids content: Up to 10mg/L
pH range: 6.5 to 8.5
Turbidity: Up to 2 NTU
E.Coli: Up to 1 cfu/100mL
Chlorine: Up to 0.5 mg/L
Biochemical Oxygen Demand (BOD5): Up to 10mg/L
Chemical Oxygen Demand (COD): up to 50 mg/L
Suspended Solids content: Up to 10mg/L
pH range: 6.5 to 8.5
Turbidity: Up to 2 NTU
E.Coli: Up to 1 cfu/100mL
Chlorine: Up to 0.5 mg/L
HICLEAR Wastewater Treatment Units are available in two treatment modes, aerobic and anaerobic treatment units. For installation in cities and urban settings, aerobic treatment units are recommended, while for installations in remote areas without access to electricity, our zero power systems running on anaerobic treatment mode are recommended.
HICLEAR Wastewater Treatment Units can be installed in compact conditions with minimum space requirements with semi-buried, underground and aboveground modes available.
Installing HICLEAR Wastewater Treatment Units can be done by appointing a registered HICLEAR approved installer to carry out installation at site. To understand how a HICLEAR Wastewater Treatment Unit would fit into your existing wastewater treatment system, study the flow diagram and suggested layout drawings for our standard dimension systems ranging from 4 to 12 metres in length.